Bootloading/Burning hex file to Atmega328 using Parallel port

Dear all,

While working using arduino, Bootloader has crashed, we came with the solution for bootloading/burning hex file into Atmega328 without arduino using icsp pins in microcontroller and parallel port. we have taken the circuit and explanation from avrprogrammers.com.

Here is a solution for Bootloading/programming Atmel atmega328 uisng ICSP pins.

Connect the atmega328 pins(MOSI, MISO, SCK, RESET and GND) as shown in schematic, power up the circuit with five volts. To do this I have used the ISP Programmer 1.2.0.56.
For software click here.

Here is the procedure for using this software:-